Scrypt Mining Hash Rate: 504MH/s (±7% is expected).Power Consumption: 800W (±10%) at the wall (with Bitmain’s APW3 PSU, 93 percent efficiency, 25C ambient temp).Power Efficiency: 1.6 J/MH at the wall (with Bitmain’s APW3 PSU).Noise level: Loud. Not for desk-top use. Sounds like a vacuum.Chip quantity per unit: 288 x BM1485.Rated Voltage: 11.60 ~13.00V.Operating Temperature: 0C to 40C.Network Connection: Ethernet (cable not included).Notes:1. Because of the nature of these products, there are higher than normal restocking fees (in most cases 20%). The restocking fees are in most cases waived in the event that there’s a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we will begin troubleshooting with you and/or processing a return.2. Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (will have to be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect a couple of PSU to the same hash board to prevent imaginable damage and instability.3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.4. Power supply unit is not included. Bitmain recommends the APW3++ power supply for the AntMiner L3+.Compatible Coins:ABYADCNANCARIAURBELABLAZRBLCNBLZBTACNCCSCDGBDOTEMC2EMDFRNGAMEGLDKICLINXLTBLTCLUNAMECMOONNLGNOTENVCNYANPAKQTLSCORESFCSONGSXCTIPSTROLLTTCWBBWDCXVG
Fastest Litecoin (or other Scrypt-based coin) ASIC miner commercially to be had!
Hash Rate: 504MH/s ±7%
Power Consumption: 800W ±10% (Power supply sold one after the other)
Built-in controller – No separate host computer required for operation.
Power supply sold one after the other. AntMiner APW3++ or APW5 really useful.