AntMiner S9 Specifications:
1. Hash Rate: 13.5 TH/s ±7%
2. Power Consumption: 1323W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 600M
Please note the following:
1. As a result of the nature of these products, there are higher than normal restocking fees (normally 20-40%). The restocking fees are normally waived in the event that there’s a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we will begin troubleshooting with you and/or processing a return.
2. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (will have to be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect a couple of PSU to the same hash board to prevent imaginable damage and instability.
3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit isn’t included. Bitmain recommends the APW3 or the APW5 power supply for the AntMiner S9.
Hash Rate: 13.5TH/s ±7%
Power Consumption: 1323W ±7% (Power supply not included).
Most Power Efficient Miner in Existence: 0.098 J/GH ±7%
Power supply sold one after the other. AntMiner APW3 or AntMiner APW5 really helpful.
Built-in web management portal. No separate host computer required.